Three-dimensional CFD modeling of transport phenomena in anode-supported planar SOFCs

In this study, a three-dimensional computational fluid dynamics model has been developed for an anode-supported planar SOFC. The conservation equations of mass, momentum, species/charges and thermal energy are solved by finite volume method for a complete unit cell consisting of 13 parallel channels in both anode and cathode. The simulation results of the developed model are well in agreement with the experimental data obtained at same conditions. In this study, the co-flow arrangement with hydrogen utilization of 60 % and operating voltage of 0.7 V is used as the base case, and compared with the counter-flow arrangement. The predicted results reveals that the maximum temperature obtained in the counter-flow arrangement is about 10 °C lower than that of co-flow, but the counter-flow arrangement has a higher temperature gradient between the respective anodes and cathodes in a cross-section normal to the main flow direction, especially in the air inlet region of the cell (x = 0.04 m),which is very harmful to the lifetime of materials. The current density is very unevenly distributed along and normal to the flow direction for both the co- and counter-flow arrangements, and the maximum values occur at junctions of the electrodes, channels and ribs, which causes higher over-potentials and ohmic heating.     

Aharonov–Bohm effect in non-uniform crater-like quantum dot with double rim

We study electron energies in a double concentric quantum ring with anisotropy in the rims heights in the presence of the external magnetic field applied along the symmetry axis. To this end, we consider a model in which the thickness grows linearly from the axis up to the inner rim with a slope different from one between the inner and the outer rims. The anisotropy in the rims heights originated by the presence in the structure of various valleys we simulate by periodic dependence of the slope on the radial direction. We show that the wave functions of the electron confined in such structure can be found analytically if the slopes in all radial directions are the same, and by using a simple exact diagonalization procedure otherwise. The behavior of the electron energies as functions of the magnetic field, rings radii and rims heights, as well as the number of the valleys and their depths is consistently described with our formalism. The entanglement of the states with different radial and orbital quantum numbers, the period and the amplitude of the Aharonov–Bohm oscillations are very sensible to any variations of the rims heights.     

Influence of Al-doped ZnO and Ga-doped ZnO substrates on third harmonic generation of gold nanoparticles

Principal role of substrate types on the nonlinear optical properties of Au NP was investigated. Third harmonic generation (THG) studies were carried out for Au NP deposited on the Al-doped ZnO (AuNP/AZO) and Ga-doped ZnO (AuNP/GZO) substrates at fundamental wavelength of 20 ns Er:glass laser (generating at 1540 nm wavelength) during photostimulation by the 532 nm 15 ns laser pulses. Sizes of Au NP were 5 nm, 10 nm, 20 nm, and 30 nm. The output signal was registered at 513 nm. The photoinduced power density was increased from 0 up to 800 MW/cm². So in our work we explore the role of the substrate on the optically stimulated non-linear optical properties during simultaneous photo stimulation near the inter-band transition. The results were studied depending on the type of substrate and the sizes of the deposited nanoparticles. The analysis was done within a framework of interaction between the photoinduced light and SPR wavelengths. Control of the photoinduced temperature was done.     

电沉积纳米晶Ni-Co-Fe-P合金镀层的组织结构与摩擦磨损性能

用脉冲电沉积方法制备了纳米晶N i-Co-Fe-P合金镀层.采用X射线衍射（XRD）,透射电镜（TEM）,扫描电镜（SEM）,能谱分析（EDS）等方法研究了合金镀层的微观组织结构和成份.采用显微硬度计和摩擦磨损试验机测试合金镀层的显微硬度和摩擦磨损性能.结果表明：纳米晶N i-40.41%Co-6.16%Fe-1.63%P合金镀层的晶粒尺寸为8.3 nm,显微硬度和耐磨性明显高于不含P的N i-Co-Fe镀层;适当温度退火可以提高镀层的硬度及耐磨性;镀层的耐磨性与其硬度成正相关,且随着硬度的提高,镀层的磨损机理由磨粒磨损和黏着磨损共同作用转变为磨粒磨损主导.     

一般Hopf曲面上向量丛的结构

得到了非主Hopf曲面上连续复向量丛全纯结构的存在性及可滤性问题的充要条件.     

Graphs whose critical groups have larger rank

The critical group C(G) of a graph G is a refinement of the number of spanning trees of the graph and is closely connected with the Laplacian matrix. Let r(G) be the minimum number of generators (i.e., the rank) of the group C(G) and β(G) be the number of independent cycles of G. In this paper, some forbidden induced subgraphs are given for r(G) = n − 3 and all graphs with r(G) = β(G) = n − 3 are characterized.     

毛细管电泳-电化学发光法分离检测饮料中亮氨酸

基于亮氨酸对化学发光试剂三联吡啶钌(Ru(bpy)32+)在铂电极上电致发光信号的增敏作用,建立了一种快速测定亮氨酸的毛细管电泳-电化学发光分析方法.对实验条件进行优化,最佳实验条件如下:检测电位为1.15 V;Ru(bpy)32+浓度为7 mmol·L-1(pH=8.5);进样时间为10 s;进样高压为10 kv;分...     

A time-dependent density functional study on optical response in all-inorganic lead-halide perovskite nanostructures

Recently, all-inorganic perovskite nanostructures have become a hot research topic due to their unique optical response and novel properties. Here, we theoretically study the optical response in Cs₂PbX₄ and CsPb₂X₅ (X = Cl, Br, and I) nanostructures. First, to study the ground state, we calculate the band structures of the periodic system using the HSE06 method, which shows that all those periodic perovskites possess the direct band gaps, with distribution from 2.225 to 3.536 eV. Their valence band maximum are mainly contributed from both halogen and lead atoms, while the conduction band minimum are mainly contributed from lead atoms. Then, we study the excited state using the time-dependent density functional theory method and find that, with the increase of halogen atom radius, the photogenerated carrier concentrations in perovskite nanostructures become larger, while the surface plasmon resonance becomes localized rather than long-range. Moreover, through the analysis of photocurrent and local field enhancement, Cs₂PbX₄ and CsPb₂X₅ nanostructures exhibit nearly 40 μA photocurrent along the direction of optical polarization. Besides, by regulating the different anions, we predict that field enhancement in Cs₂PbI₄ and CsPb₂I₅ share a much stronger distribution at both the center and border parts of Pb-I planes due to localized plasmon resonance, while other perovskites are distributed at the edge parts of Pb-I planes, caused by long-range plasmon resonance. Our research shows that all-inorganic perovskite nanostructures are great candidate materials for developing optoelectronic devices working in high-frequency and high-energy regions and improving their application in sensitive detection and sensors.     

Pretreatment of garlic powder using sweep frequency ultrasound and single frequency countercurrent ultrasound: Optimization and comparison for ACE inhibitory activities

The sweep frequency ultrasound (SFU) and single frequency countercurrent ultrasound (SFCU) pretreatments were modeled and compared based on production of angiotensin I-converting enzyme (ACE) inhibitory peptides from garlic hydrolysates. Two mathematical models were developed to show the effect of each variable and their combinatorial interactions on ACE inhibitory activity. The optimum levels of the parameters in SFU were determined using uniform design, which revealed these as follows: total ultrasonic time 1.5 h, on-time of pulse 18 s and off-time of pulse 3 s. Under optimized conditions, the experimental values of SFU and SFCU were 65.88% and 67.78%, which agreed closely with the predicted values of 63.44% and 67.33%. The SFU and SFCU pretreatments both resulted in higher ACE inhibitory activity compared with untreated garlic (p < 0.05). However, there were no significant differences in the ACE inhibitory activities and IC₅₀ values obtained from SFCU and SFU pretreatments under optimum conditions (p > 0.05).